Produkt   >   Quilter Overdrive 202

Quilter Overdrive 202

The OverDrive 202 picks up where the Overdrive 200 left off and features three new voices with their own overdrive channel, reverb, limiter, and a cabinet simulated line out. The three voices range from the newly enhanced Quilter classic Full Q on voice 1, the “bell-like” harmonically rich voice 2, through to the incisive and full bodied attack of voice 3. The Overdrive 202 delivers an appropriate voice for any musical setting. Combine with a UFC-3 and BlockDock 12 HD for the ultimate grab and go rig.
Features 3 voicings, two controllable channels, nine powerful controls including a Limiter that works on both channels, master Reverb, FX Loop with “stealth input” for tracks, pre/post signal and headphone jack with internal cab-sim, traditional Quilter warmth that wakes up any good speaker, and our latest 200W power platform with “go anywhere” AC voltage compatibility. On the rear: RJ-45 footswitch jack, dual-impedance 4 and 8 ohm speaker jacks, and locking AC cord IEC inlet. 

• Kontakt mig for leveringstid eller andre spørgsmål
• Fuld garanti og returret. 

|   Mere info fra :  QUILTER LABS   | 

Quilter 101 Reverb Featuring an interesting new take on the usual three-knob EQ section, the Bass and Treble controls use traditional “tone stack” technology, yielding a familiar bright chime based on 50 years of tradition, while the active Mid control provides a more strongly voiced cut/boost function for increased versatility. Increasing the Mid control boosts the frequencies that give an aggressive “D-Style” bite to the sound, while decreasing Mid brings out that familiar clean-60’s Blackface tone.
Weighing the same 2 pounds as its little brother, the 101 Reverb is so light you’ll think we forgot to put the guts in! Even with the same compact footprint, it has more than enough power to bring any cabinet to life! 

Quilter Overdrive 202

Power Output: 0 to 200 watts, 4-8 ohms
AC Power Req.: 100-240Vac, 50-60Hz, 300W maximum
Input Connections: 1/4″ mono, 2meg impedance.
Effects Loop: 1V full scale, 1K Send impedance, 47K Return impedance.
Signal Out (Front): TRS, switchable, Line Out pre-Master +4dB balanced, or Headphone post-Master.
Speaker 1 Output: 8 ohms, 200 W minimum recommended rating
Speaker 2 Output: 4 ohms, 200 W minimum recommended rating
Dimensions: Height: 2.5” + 0.4” rubber feet (6.35cm + 1cm rubber feet) Width: 8.6” (21.8cm) Depth: 7.3” (18.5cm)
Weight: 4 lbs (1.8kg)

DKK 4.525
lkke på lager